Fluid Beds/Accessories
Powder Painting Fluid Bed
A fluid bed allows powder paint to be suspended in air to approximately twice its normal volume inside the units interchangeable cup. By “fluidizing” the powder, quality and control of the paint application are greatly improved over trying to dip into stagnant powder. In other words, the powder paint will look and feel like water at a slight boil making it easier to dip heated jigs and spinner blades into the paint and to allow a thinner, more even coat of paint. This will save time and money by using less paint per jig. Also with a thinner coat, there is less chance of drips forming during the final curing process. Jig eyes remain open and clear of paint. A fluid bed is a must for large jigs. Once you use a fluid bed to powder paint your jigs or spinner blades, you will never go back to the old way of dipping the jigs in a jar. The powder cup is removable so you could have multiple powder cups with a different color in each cup to make changing colors easier. The fluid bed comes with one reusable powder cup complete with lid. To change colors in the powder cup, simply dump the paint out of the cup back into the jar and wipe or vacuum out the rest. For more information on using a fluid bed, check out the step-by-step instructions link below. Note: We use a few different brands of air pumps, all of which we have tested to verify they work properly. The air pump you receive may be different than the one in the picture.
The filters are permanently glued on the cups and are made with a very durable, hard plastic that is designed specifically for powder paint fluidizing applications. The plastic will not tear or rip. It allows for the proper diffusion of air to give the powder paint a uniform lift. The filter will not need to be replaced under normal operating use.
Comes in 2 sizes!!
3″ Fluid Bed – 3″ Base with cups 3″ in diameter and 3″ deep
2″ Fluid Bed – 2″ base with cups 2″ in diameter and 2 1/2″ deep
2″ Dual Fluid Bed!
Run 2, 2″ fluid beds at the same time! Put the base coat in one cup and a second color in the other. Works great for putting on a UV Blast topcoat, a clear coat, or a glitter coat. Comes with one air pump, two bases and two, 2″ cups.
2″ Downsize Kit
The 2″ Downsize Kit is an adapter that fits inside the base of the 3″ fluid bed to allow you to use a 2″ diameter cup instead of the 3″ diameter cup. This allows you to use less paint to paint your jigs. The 2″ diameter cup is approximately 2 1/2″ deep and can be used with 1oz of powder paint or less. The 2″ diameter cups are interchangeable to allow easy changing of cups and colors.
Extra Fluid Bed Filters
(not required for our fluid beds cups)
These Fluid Bed Filters are a hard plastic filter that is specifically designed to fluidize powder paint. They evenly diffuse the air flow to allow a uniform lift of the powder paint. The filters are cut so that they are a little larger than the inside of the diameter of the cup and a little smaller than the outside of the cup to allow you to glue them to the bottom. So the 2″ filter is 2 1/4″ in diameter and the 3″ filter is 3 1/4″ in diameter. When installing these filters, the smooth side goes towards the inside of the cup. I use an adhesive caulking while others have used a hot glue gun. Do not use a watery glue like super glue.
